Sennheiser SDC 8000 Conference Phone User Manual


 
Configuring the SDC 8000 system
92
̈ Press the MICRO key ƺ to transmit the selected desk number to the
central unit.
Note!
If an error occurs during initialization, the text “
Init Refused” is
shown on the displays of the interpreter consoles. In this case, re-
initialize the interpreter consoles.
̈ If all booth and desk numbers are assigned correctly, press the ENTER
key on the central unit to save this configuration.
The displays of the interpreter consoles show the languages assigned
to the A-channel and the B-channel and other related information (see
example illustration on the left).
The interpreter consoles are now ready for operation.
Note!
The max. number of interpreter consoles per booth has to be
configured via the central unit (see “Setting the max. number of
interpreter consoles per booth” on page 86 and “Half-automatically
initializing all interpreter consoles on the central unit” on page 90).
Displaying the booth and desk number of an interpreter console
To display the booth and desk number of an interpreter console:
̈ Press the MUTE key ¸ and keep it pressed.
̈ While keeping the MUTE key pressed, press the “MENU ̆” or
“MENU ̄” menu selection key ƿ.
The booth and desk number of this interpreter console appear on the
display.
Adding interpreter consoles to an existing configuration
To add individual interpreter consoles to an already existing configuration:
̈ From the central unit’s operating menu, choose “
Interpretation”,
Initialize Units” and “Add Unit” one after the other”.
The red signal light rings on all interpreter consoles which have not yet
been assigned a booth and desk number start flashing and the
interpreter consoles’ displays show “
01” for both the booth and the
desk number.
̈ On all interpreter consoles not yet initialized, manually assign the
booth number (see “Manually assigning an interpreter console an
individual booth number” on page 90) and the desk number (see
“Manually assigning an interpreter console an individual desk number
(interpreter console number)” on page 91)
Full Init
Press ENTER to save
01 ENG
02 ARA
00 00 00 00
FLO FLO FLO FLO
¸
ƿ
Press Mic to confirm
BOOTH DESK
02 02