Filter
Top Products
Configuring the SDC 8000 system
87
language. You then have to configure your system so that it comprises
three interpreter booth with two interpreter consoles each.
Configuring the operating mode between booths
To determine whether or not interpreter consoles installed in different
booths but configured to the same target language can be simultaneously
active:
̈ From the central unit’s operating menu, choose “
Interpretation”,
“
Options” and “Mode between Booth” one after the other.
The current mode in shown on the display.
̈ Choose the desired mode.
You can choose between the modes “
Mixed”, “Override” and
“
Toggle Override”.
y Choose “
Mixed” if interpreters in different booths interpret into the
same target language and work in turns.
When two interpreters simultaneously interpret into the same
language, the red signal light ring ¹ and the “Microphone active”
LED ƹ on their consoles light up.
y Choose “
Override” if activating an interpreter console in another
booth turns off the currently active interpreter console. The
interpreter console that was just turned off can only be turned on
again if the interpreter console by which it was turned off is
deactivated.
y Choose “
Toggle Override” if activating an interpreter console in
another booth turns off the currently active interpreter console. The
interpreter console that was just turned off can be turned on again
any time by pressing the MICRO key ƺ.
̈ Press the ENTER key to save your setting.
Configuring the operating mode within a booth
To determine whether or not the interpreter consoles installed within a
booth can be simultaneously active:
̈ From the central unit’s operating menu, choose “
Interpretation”,
“
Options” and “Mode in Booths” one after the other.
The current mode in shown on the display.
̈ Choose the desired mode.
You can choose between the modes “
Mixed” and “Override”.
y Choose “
Mixed” if several interpreters in the same booth interpret
into the same language. When two interpreters simultaneously
interpret into the same language, the red signal light ring ¹ and the
“Microphone active” LED ƹ on their consoles light up.
y Choose “
Override” if activating another interpreter console within
a booth turns off the currently active interpreter console. The
interpreter console that was just turned off can only be turned on
again, if the interpreter console by which it was turned off is
deactivated.
Options
3 Mode between Booth
Mode between Booths
Mode = Override
Press ENTER to Save
Options
4 Mode in Booths
Mode in Booths
Mode = Mixed
Press ENTER to Save