Filter
Top Products
18 Phone Basics
2. Select More....
3. Select Call setup.
4. Select Abbreviated Dial.
5. Select On and press .
6. Input the five or six digit prefix (for example, area code and prefix) and
press .
Making an Abbreviated Dial Call
1. Enter the last four or five digits of the phone number. Abbrev. Dial is
displayed in the lower left corner with the prefix digits displayed.
Note: If there is more than one Contact entry that matches the last four or five
digits, a list is displayed which allows you to select the desired number to call.
2. Press to make the call.
Using Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory to make
contacting friends and family as easy as pressing a few buttons. With this feature,
you can dial Speed Dial entries using one key press for locations 2-9, or two key
presses for locations 10-99.
To use One-Touch Dialing for Speed Dial locations 2-9:
• Press and hold the appropriate key for approximately two seconds.
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for approximately two seconds.
Using Caller ID
To block your phone number from being displayed for a specific outgoing call:
1. Dial *67 on your keypad.
2. Enter the number you want to call.
3. Press .
To permanently block your number, call the Customer Service department of your
network service provider.
m560 BMC.book Page 18 Wednesday, September 2, 2009 3:39 PM