Polycom 1500 Telephone User Manual


 
Getting Started with Your Phone
1 - 7
Connecting the Phone Using AC Power
To connect the phone using AC power, you require the optional AC Power Kit,
containing a Power Adapter and Regional Power Cord.
The following figure shows how to connect the phone using AC power.
To connect the phone using AC power:
1. Connect the network cable between the LAN jack on the phone and the
LAN port on the wall or hub/switch device port.
2. Connect the DC plug on the power adapter to the 48V DC jack marked on
the phone.
3. Connect the regional power cord between the power adapter and the wall
outlet.
Note
The regional power cord is country-specific. The power cord shown below may
differ from the one in your kit.
1
2
3