Filter
Top Products
66
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the registration from
the current base unit.
Only one handset can be canceled at a time near the base unit.
Make sure the handset and the base unit are not being used.
•“[-]” is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 67.
1 Press [CONF/FUNCTION].
2 Scroll to “Initial setting” by pressing
[] or [], then press
[]
.
3 Scroll to “Registration” by pressing []
or [], then press
[]
.
4 Scroll to “Deregistration” by pressing
[] or [], then press
[]
.
5 Press [3][3][5] to delete the registration
memory.
• If you make a mistake, press [HOLD] (CLEAR),
then enter “335”.
6 Press the soft key (
).
• The registration memory will be erased on both
the handset and the base unit.
• If 3 beeps sound, you entered a wrong code.
Enter “335”, then press the soft key ( ).
• To register the handset to another base unit of
the same model, start from step 5 on page 67.
Handset
▼
Initial setting
▼
Registration
▼
Deregistration
Deregistration
Enter code:335
:335
OK
OK
Handset [2]
Deregistered
[-]
Ex. Extension number 2