Filter
Top Products
Room Monitor Feature
46
To monitor with
The destination unit must not be in use.
• The monitored user can stop being monitored by:
– on the handset, press [OFF] or place the handset on the base unit.
– on the base unit, press [LOCATOR/INTERCOM/TRANSFER] or
[DIGITAL SP-PHONE].
•“Room monitor” is also displayed on the monitored unit.
• While the base unit is monitoring or being monitored, the LOCATOR/INTERCOM/
TRANSFER indicator flashes and the DIGITAL SP-PHONE indicator lights.
To monitor with
The destination handset must not be in use.
1 Press [HOLD] (INTERCOM), then press the soft key (
).
2 To call the base unit, press [0].
To call another handset, press its extension
number ([1] to [8]).
• To monitor from the speaker, press []. You can
place the handset on the charger but you cannot
place it on the base unit to continue monitoring.
Placing the handset on the base unit will
disconnect room monitoring. To switch back to
the receiver, press [].
3 To end monitoring, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER],
then press [MUTE].
2 To call the handset, press the extension
number ([1] to [8]).
3 To end monitoring, press [LOCATOR/INTERCOM/TRANSFER] or
[DIGITAL SP-PHONE].
Handset
MONITOR
Press extension#
for room monitor
Room monitor
00-00-05
01
Base Unit
Press extension#
to call
MUTE=Monitor
Press extension#
for room monitor
Room monitor
00-00-05
01