Filter
Top Products
Telephone System
33
Using the Caller List
For assistance, please call: 1-800-211-PANA(7262)
Storing Caller List Items in the Phone Book
Callers’ names and phone numbers that are in
the handset and the base unit
Caller
List can be stored in each unit’s phone book.
• You cannot store Caller List items in the phone book if a phone number is not displayed.
Erasing Caller List Items
To erase a specific item
1
Scroll to the desired caller by pressing [] or
[].
• If the number requires editing, see page 31.
2 Press [].
• To stop storing, press [].
3 Press [] again.
•
If there is no name information for the caller, “Enter name” will be displayed.
–You can enter a name by performing the following steps:
(1) enter the name (p. 35), (2) press [], and (3) press the soft key
(
) on the handset or press [] (Save) on the base unit.
–If a name is not required, press [], then press the soft key (
) on the
handset or press [] (Save) on the base unit.
• To continue storing other items, repeat from step 1.
• To exit the programming mode, press [OFF] on the handset. For the base
unit, press [STOP].
1 Scroll to the desired caller by
pressing [] or [].
2 Handset:
Press [HOLD] (CLEAR).
Base unit: Press [ERASE].
•“Clear” is displayed.
• To erase other items, repeat
from step 1.
• To exit the Caller List, press
[OFF] on the handset. For the
base unit, press [STOP].
Handset Base Unit
TURNER,CINDY
1-555-456-7890
11:20A JAN.12 ×3
▼
▼
Save phone book?
=No =Yes
▼
SA VE
▼
SA VE
▼
Handset
Base Unit
T
o erase a
ll
i
tems
1 Press [] or [] to enter the
Caller List.
• Before erasing all items, make
sure that “0 missed call” is
displayed.
2 Handset:
Press [HOLD] (CLEAR).
Base unit: Press [ERASE].
• To stop erasing, press [].
3 Handset:
Press [HOLD] (CLEAR) again.
Base unit: Press [ERASE] again.
•“All clear” is displayed and
all items in your Caller List are
erased.