Panasonic KX-TG5100M Telephone User Manual


 
40
Intercom
A 2-way intercom can be set up between a handset and the base unit, and between
two handsets (when the system has two or more handsets, p. 3). You can call all
handsets from the base unit at once.
Page the desired unit(s) by entering the extension number, shown in the top right of
each handsets display. The base units extension number is 0.
Using this feature, you can also locate a misplaced handset.
Making Intercom Calls
1 Press [HOLD] (INTERCOM).
2 To page the base unit, press [0].
To page another handset, press the
extension number ([1] to [8]).
The paged unit will ring for 1 minute.
To stop paging, press [OFF].
3 When the paged party answers, start talking.
You can switch to the speaker by pressing [].
To switch back to the receiver, press [].
4 To disconnect the intercom, press [OFF].
1 Press [LOCATOR/INTERCOM/TRANSFER].
The LOCATOR/INTERCOM/TRANSFER indicator
and the DIGITAL SP-PHONE indicator light.
2 To page all handsets, press [0].
To page a handset, press its extension
number ([1] to [8]).
The handset(s) will ring for 1 minute.
To stop paging, press [DIGITAL SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].
3 When the paged party answers, talk into the
MIC.
4 To disconnect the intercom, press [DIGITAL SP-PHONE] or
[LOCATOR/INTERCOM/TRANSFER].
Handset
Press extension#
to call
Calling [0]
Ex. Calling Base unit
Calling [2]
Ex. Calling Handset 2
Intercom
00-00-05
01
Base Unit
Press extension#
to call
MUTE=Monitor
Paging [ALL]
Ex. Calling all Handsets
Calling [1]
Ex. Calling Handset 1
Intercom
00-00-05
01