Filter
Top Products
15
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Useful information
•“
–––––––––––––––” indicates the beginning or end of the function menu.
• You can go back to the previous display by pressing
[]
except when entering
characters or numbers. To return to the main menu from the sub-menu, press
[]
.
• After programming is complete, the display will return to the main menu or the
sub-
menu depending on which menu the selected item is located
. (See the menu
tables on pages 15 and 16.)
• To exit the programming mode:
For the handset, press [OFF]. For the base unit, press [STOP].
• If you do not press any buttons for 60 seconds, the unit will exit programming mode.
• If the unit detects a problem, an error message will be displayed (p. 68–70).
Function Menu Table
You can use the following functions to customize your unit. See the corresponding
pages for function details.
Handset
*The items with “
*
” in the menu table can be programmed with either the handset
or the base unit. You do not need to program these items on both the handset
and the base unit.
▼
▼
Ringer volume
Ringer tone
Incoming call
Copy 1 item
Copy all items
LCD contrast
Auto talk
Room monitor
Caller ID edit
Set tel line
Set dial mode
Set flash time
Set line mode
Registration
HS registration
Deregistration
*
*
*
Key tone
Main menu
Sub-menu I
Save phone book
Ringer setting
Copy phone book
Initial setting
Sub-menu II
p. 18
p. 48
p. 18
p. 67
p. 66
p. 19
p. 19
p. 49
p. 38
p. 39
p. 20
p. 49
p. 20
p. 45
p. 32
p. 34