Filter
Top Products
Telephone System
27
Making Calls
For assistance, please call: 1-800-211-PANA(7262)
To adjust the speaker volume
(8 levels) while talking
To increase, press [].
To decrease, press [].
• The number of steps indicates the
volume level.
• If you try to increase/decrease volume
when it is at the maximum/minimum
levels, 3 beeps will sound.
To dial after confirming the
entered number
1. Enter a phone number.
• If you misdial, press [ERASE].
Dial the correct phone number.
• To cancel, press [STOP].
2. Press [DIGITAL SP-PHONE].
3. When the other party answers,
talk into the MIC (microphone).
4. To hang up, press [DIGITAL SP-
PHONE].
To redial the last number
dialed
Press [DIGITAL SP-PHONE], then
press [PAUSE/REDIAL].
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed with
the base unit are stored in the redial list.
1. Press [PAUSE/REDIAL].
• The last number dialed is displayed
with number 1.
2. Scroll to the desired number by
pressing [] or [].
• You can also scroll down through
the list by pressing
[PAUSE/REDIAL].
• To exit the list, press [STOP].
3. Press [DIGITAL SP-PHONE].
• To erase an item, scroll to the item
then press [ERASE].
• If “No items stored” is displayed,
the list is empty.
To put a call on hold
Press [HOLD] while talking.
•“Hold” is displayed and the DIGITAL
SP-PHONE indicator flashes.
To release the hold,
press
[DIGITAL SP-PHONE]
.
• Handset users can release the hold by
pressing [] or [].
• If another phone is connected on the
same line (p. 11), you can also
release the hold by lifting its handset.
• If a call is kept holding for 6 minutes,
an alarm tone will start to sound. After
4 additional minutes on hold the call
will be disconnected.
Loud
Low
High
Ex. Level 8
3334444