Filter
Top Products
19
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Volume
You can select the ringer volume to HIGH, MEDIUM, LOW or OFF on the handset
and the base unit separately. The factory preset is HIGH. If set to OFF, the unit will
not ring for external calls and will ring at the LOW level for intercom calls.
• If set to OFF, the base unit displays “Ringer off” while not in use and no new
calls are in the Caller List. The handset displays “Ringer off” while not in use.
• You can also select the ringer volume while an external call is being received. Press
[]
or
[]
while the unit is just ringing.
Ringer Tone
You can select one of 6 ringer tones for external calls on the handset and the base
unit separately. The factory preset is “1”.
1
Handset: Press
[
CONF/FUNCTION
]
.
Base unit: Press
[
FUNCTION/EDIT
]
.
2 Scroll to “Ringer setting” by pressing
[] or [], then press []
.
3 Press [] at “Ringer volume”.
4
Select the desired volume by pressing
[]
or
[]
.
• The volume will change and ring.
• The number of steps indicates the volume level.
• To turn the ringer OFF, press [] repeatedly
until “Off ?” is displayed.
5 Handset: Press the soft key (
).
Base unit: Press [] (Save).
1 Follow steps 1 and 2 of “Ringer Volume” above.
2 Scroll to “Ringer tone” by pressing [] or
[], then press [].
3
Select the desired tone by pressing
[]
or
[]
.
• The tone will change and ring. If the ringer volume
has been set to OFF, the unit will not ring.
• You can also select the ringer tone by pressing
[1] to [6].
4 Handset: Press the soft key (
), then press [OFF].
Base unit: Press [] (Save), then press [STOP].
Handset Base Unit
▼
Ringer setting
▼
Ringer volume
Ringer volume
Low High
Ex. HIGH
Ringer volume
Off ?
Ex. OFF
SA VE
▼
Handset Base Unit
▼
Ringer tone
Ringer tone
:1
SA VE
▼