Filter
Top Products
User Programming (Manager Programming) 3-9
3.2 User Programming (Manager Programming)
System Speed Dialing Number Set
001
Description Used to program the System Speed Dialing numbers. These numbers are
available to all extension users.
Selection • Speed dial numbers: 00 through 99
• Telephone number: 24 digits (max.)
Default All speed dial numbers – Not stored
Programming 1. Enter 001.
Display: 001 SYS SPD DIAL
2. Press NEXT.
Display: SPD-Code?→
3. Enter a speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00:Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another speed dial number, press NEXT or PREV, or
SELECT and the desired speed dial number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • Each speed dial number has a maximum of 24 digits. The valid
characters are 0 through 9, , and # keys, and the FLASH or
FLASH/RCL, PAUSE, SECRET and – (hyphen) buttons.
– To store the flash signal, press FLASH or FLASH/RCL.
Note : The stored flash will only be effective during an
established call.
(Refer to the Installation Manual, Section 3 “External
Feature Access”.)
– To store a hyphen, press the “–” button.