Filter
Top Products
2-28 Station Programming (Personal Programming)
2.2
Station Programming (Personal Programming)
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the
following four line preferences:
1.) No Line Preference
2.) Idle Line Preference
3.) Prime Line (Outside Line) Preference
4.) Prime Line (INTERCOM) Preference (— default)
Follow the programming procedure according to your selection.
<Note>
When setting “Idle Line Preference”, “No Line Preference” or “Prime Line (Outside
Line) Preference”, it is not possible to access any DPT features after going off-hook. To
access these DPT features, press the INTERCOM button before or after going off-hook.
No Line Preference — Outgoing (Assignment)
When you go off-hook, you are not connected to any line. You must choose the line.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Dial 1.
• The display shows the current status.
2. Dial 1.
• The display shows:
3. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Pref.Out:No
2
3
AUTO DIAL
STORE
1
1
1