Filter
Top Products
2-14 Station Programming (Personal Programming)
2.2
Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible CO button as an One-Touch Dialing button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the Flexible CO button you wish to assign as an One-
Touch Dialing button.
2. Dial 2.
• The display shows:
3. Enter the desired number (an extension number, phone
number, etc.).
• Up to 16 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the
overlay.)
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The number can be an extension number, telephone number or a feature number. Up
to sixteen digits can be stored in an One-Touch Dialing button.
• To store the telephone number of an outside party, a line access code (9 or 81 through
83) must be stored as the leading digit.
• You can store a number consisting of seventeen digits or more by dividing it and
assigning it in two One-Touch Dialing buttons. In this case, the line access code
should be stored in the first button.
• You can use 0 through 9, , #, PAUSE, FLASH or FLASH/RCL, CONF and
INTERCOM for storing.
# : change the dialing mode (Pulse to Tone)
FLASH or FLASH/RCL :hook flash
PAUSE : pause
CONF : — (hyphen)
INTERCOM : for secret dialing
KX-T7220 and KX-T7250 telephones do not have a PAUSE button. The PROGRAM
button can be used instead of the PAUSE button while programming.
1
2
4
AUTO DIAL
STORE
3
desired number
2
CLR