Filter
Top Products
DPT Features 4-31
4.2 DPT Features C
Call Hold
Allows you to place a call on hold.
To place a call on hold
During a conversation;
1. Press the HOLD button.
• The corresponding CO or INTERCOM indicator light
flashes green slowly.
• You hear a confirmation tone.
• You may replace the handset.
Retrieving a call on hold
- at the holding extension;
1. Press the CO or INTERCOM button which is flashing green
slowly.
• The CO or INTERCOM indicator light turns steady green.
Conditions
• To retrieve a call on hold at another extension, refer to “Call Hold Retrieve” in this
manual.
• If a held call is not retrieved within the specific period of time (default: 60 sec.), “Hold
Recall” occurs.
• If a held outside call is not answered within thirty minutes, it is automatically
disconnected.
• With outside calls, you can put multiple calls on hold. However, with intercom calls,
you can put only one call on hold.
Programming References
• System Programming — Installation Manual
[200] Hold Recall Time
Feature References
Call Hold Retrieve
Hold Recall (→ see Installation Manual)
1
CO
INTERCOM
or
HOLD
1