Filter
Top Products
User Programming (Manager Programming) 3-7
3.2 User Programming (Manager Programming)
Date and Time Set
000
NOTICE
It is assumed that you have read Section 3.1 “User Programming Instructions”. Soft button usage is
explained in that section, therefore no references will be made to them in the following instructions.
The soft buttons can be used in place of the overlay keys at any time.
Description Sets the current data and time.
Selection • Year: 00 through 99
• Month: Jan. through Dec.
• Day: 1 through 31
• Day of the week: SUN / MON / TUE / WED / THU / FRI / SAT
• Hour: 00 through 12
• Minute: 00 through 59
• AM / PM
• Clock hour: 12 or 24
Default ’97 Jan. 1 WED 12:00 AM 12
Programming 1. Enter 000.
Display: 000 DATE / TIME
2. Press NEXT.
Display example: ’97 Jan. 1 WED
3. Enter the year.
To change the current entry, press CLEAR and enter the new year.
4. Press .
5. Keep pressing SELECT until the desired month is displayed.
6. Press .
7. Enter the day.
To change the current entry, press CLEAR and enter the new day.
8. Press .
9. Keep pressing SELECT until the desired day of the week is
displayed.