Filter
Top Products
Station Programming (Personal Programming) 2-37
2.2
Station Programming (Personal Programming)
Combination Table
Characters can be entered using the dial key pad, various buttons or the Jog Dial for
storing names.
Combination Table 1 shows the combination of keys and the number of times to press
the SELECT (AUTO ANSWER/MUTE) button, or the combination of keys and the
SHIFT and Soft buttons to enter characters.
(The AUTO ANSWER/MUTE button becomes the
SELECT button when using the overlay.)
To enter a character, find the key and number of times to press the SELECT button or the
corresponding SHIFT and Soft button combination on the table. Press the corresponding
key first, then press the SELECT button the required number of times. Or, you can use the
SHIFT button and a Soft button (S1 through S3) instead of the SELECT button.
Combination Table 2 shows the combination of keys and the number of pulses to move
the Jog Dial (click tones) to the right.
To enter a character, find the key and number pulses to rotate the Jog Dial. Press the
corresponding key first, then rotate the Jog Dial the required number of times. Or, if you
keep rotating the Jog Dial after pressing any dialing key, all of the characters in the table
will be displayed.
* If your telephone is a KX-T7431, do not use the provided SELECT button. Use the AUTO ANSWER /
MUTE button which becomes the SELECT button when using the overlay.
Combination Table 1
Keys 0 1 2 3 4 5 6 7 8
11QqZz!?
22AaBbCc
33DdEeFf
44GgHhIi
55JjKkLl
66MmNnOo
77PpQqRrSs
88TtUuVv
99WwXxY
yZz
00 .,’:;
*/+-=<>
##$%&@()
SHIFT & Soft
Combination
S1
SHIFT+ S1 SHIFT+ S2
S2 S3
SHIFT+ S3
SHIFT+
SHIFT+ S2
SHIFT+
SHIFT+ S1
Pressing
SELECT*
(Times)