Panasonic KX-TD308 Telephone User Manual


 
4-92 DPT Features
O 4.2 DPT Features
Operator Call
Allows you to call an operator within the system. Two extensions can be assigned as
Operator 1 and 2.
1. Lift the handset or press the SP-PHONE/MONITOR button.
2. Dial the feature number (0).
Conditions
The call is routed to Operator 1 first. If Operator 1 is busy, then it is routed to
Operator 2. Through System Programming, it is possible to change the routing so
that Operator 1 and Operator 2 are called simultaneously when the operator is called.
If an operator is not assigned, this feature is not available and you will hear a reorder
tone.
Programming References
System Programming — Installation Manual
[990] System Additional Information, Field (44)
1
2
0