Filter
Top Products
2-4 Station Programming (Personal Programming)
2.1 Station Programming Instructions
To confirm the assigned data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible CO button.
• The display shows the current status.
2. Press the HOLD (END) button.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— If you wish to change the data, follow the programming procedure explained in this
section.
To clear the data on the Flexible button
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the desired Flexible CO button that you wish to clear.
2. Dial 2.
3. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
— The following lists are the buttons and programming access numbers used for Station Programming.
Detailed operating instructions are explained in this section.
1
2
3
2
AUTO DIAL
STORE
1
2
HOLD