Filter
Top Products
DPT Features 4-13
4.2 DPT Features A
• If an entered account code does not match the pre-assigned account code, in the
verified-all calls mode or the verified-toll restriction override mode;
1) When making an outside call, a reorder tone is returned.
2) During a conversation, the code entry is accepted and the call is maintained
(= Option mode).
3) After a CPC signal
*
3
has been detected, the code entry is accepted
(= Option mode).
• If you use an account code which is for a private call, the phone number of the
destination is not recorded on SMDR.
Programming References
• Station Programming (Section 2)
Flexible CO Button Assignment — Account Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
• System Programming — Installation Manual
[105] Account Codes
[508] Account Code Entry Mode
[601] Class of Service
Feature References
Station Message Detail Recording (SMDR) (→ see Installation Manual)
Toll Restriction Override by Account Code Entry
*
1
Class of Service (COS) is used to define the features which are allowed for a group of extensions.
For more details, please consult with your dealer.
*
2
One of the dial tones. Refer to the “Tone List” in the Appendix (Section 7).
*
3
A Calling Party Control (CPC) signal is an on-hook indication sent from an outside line when the other
end hangs up. You hear a reorder tone when this signal is detected.