Filter
Top Products
Station Programming (Personal Programming) 2-31
2.2
Station Programming (Personal Programming)
Ringing Tone Selection for CO Buttons
Allows you to assign a ringer frequency to each CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1. Press the CO button you wish to change.
2. Press the same CO button again.
• The display shows the current status.
3. Enter the tone type number (1 through 8).
• The display shows the selected tone type number and you
hear the selected tone until the STORE button is pressed.
(— x: tone type number)
• If you want to change the tone type, enter a tone type
number.
4. Press the STORE button.
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Conditions
• The default is Ringing Tone Type 2.
Tone Type-x
1
2
4
AUTO DIAL
STORE
3
tone type number
CO
CO