Filter
Top Products
4-12 DPT Features
A 4.2 DPT Features
Entering account codes during or after a conversation
During a conversation or while hearing a reorder tone after the
other party hangs up (within 15 seconds);
1. Press the flexible button which is assigned as the Account
button.
• The corresponding indicator lights when using the Account
button.
• You can keep talking.
2. Enter the account code and #.
• The corresponding indicator light turns off when using the
Account button.
Conditions
• In Verified - All Calls mode, you must always enter a pre-assigned account code when
making any of the following calls unless it has previously been stored in memory.
a) Call Forwarding — to Outside Line
b) Manual Dialing (Selecting an outside line)
c) One-Touch Dialing
d) Pickup Dialing (Hot Line)
e) Redial, Last Number
f) Redial, Saved Number
g) Station Speed Dialing
h) System Speed Dialing
• In Option mode, it is possible to record a calling or called party’s account code in the
SMDR, during a conversation or within fifteen seconds after the other party hangs up.
• There is no need for an account code entry when receiving incoming calls.
• Pressing “ ” while entering an account code allows you to clear the number and re-
enter.
• Pressing the flexible button assigned as the Account button while entering an account
code cancels the entry.
• An account code can be up to ten numeric digits (0 through 9). FLASH or
FLASH/RCL, PAUSE, etc. are not allowed. After entering an account code, the
delimiter “#” or “99” must be entered.
• An account code can be stored into Memory Dialing (“One-Touch Dialing”, “Pickup
Dialing (Hot Line)”, “System/Station Speed Dialing”, “Call Forwarding — to Outside
Line”). The sequence to enter an account code into Memory Dialing is as follows:
— [Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]
or
— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]
1
2
account code and #