Filter
Top Products
4-72 DPT Features
H 4.2 DPT Features
Handsfree Operation
Allows you to dial and to talk to the other party without lifting the handset.
1. Press the SP-PHONE button.
• The microphone and the speaker are now activated and the
handsfree operation is available.
Switching from the handset to handsfree mode
1. Press the SP-PHONE button.
2. Hang up.
• Do not replace the handset without pressing the SP-PHONE
button, or the line will be disconnected.
Switching from handsfree to the handset mode
1. Lift the handset.
Conditions
• Helpful hints for Handsfree operation:
— Use this unit in a quiet room for best performance.
— If the other party has difficulty hearing you, decrease the volume.
— If you and the other party speak at the same time, parts of your conversation will be
lost. To avoid this, speak alternately.
• The handsfree mode is canceled if you do not start dialing within ten seconds.
• The KX-T7250 has a MONITOR button instead of a SP-PHONE button. It can be used
for handsfree dialing, etc., but it cannot be used for a handsfree conversation.
• You can enable handsfree mode by pressing a CO or INTERCOM button.
• When “Full One-Touch Dialing” is enabled, pressing an One-Touch Dialing, DSS
(Direct Station Selection), REDIAL or SAVE button provides the handsfree mode.
Feature References
Full One-Touch Dialing
1
1
2
SP-PHONE
SP-PHONE
1