Filter
Top Products
90
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the handset’s
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit near each other and are not being
used.
• “[-]” is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 91.
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a
new extension number of that base unit. Only one handset can be registered at a
time near the base unit.
Make sure the base unit and the other handsets are not being used. Have
both the handset and base unit nearby during registration.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Registration” by pressing [d]
or [B], then press the soft key ( ).
4 Scroll to “Deregistration” by pressing
[d] or [B], then press the soft key ( ).
5 Press [3][3][5] to delete the registration
memory.
• If you enter a wrong code, re-enter [3][3][5].
6 Press the soft key ( ).
• The registration memory will be erased on both
the handset and the base unit.
• If the handset beeps 3 times, you entered a
wrong code. Enter “335”, then press the soft key
().
• To register the handset to another base unit of
the same model, start from step 5 on page 91.
Handset
SELECT
Initial setting
SELECT
Registration
SELECT
Deregistration
Deregistration
Enter code:335
:335
OK
OK
SP
I
PRIVACY
1
Handset [2]
Deregistered
IN USE
[
-
]
Ex. Extension number 2
Handset & Base Unit
TG6500.book Page 90 Friday, June 25, 2004 6:56 PM