Filter
Top Products
Making Calls
38
To redial the last number dialed
Press [SP-PHONE] or a line button, then press [REDIAL/PAUSE].
To put a call on hold
Press [HOLD] during a conversation.
• The line button flashes.
To return to the call,
press
the line button that is flashing
.
• The handset users can also take the call by pressing the line soft key ( ) or
().
• If another phone is connected on the same line (p. 12), you can also take the call
by lifting its handset.
• If a call is kept on hold for 6 minutes, an alarm tone will start to sound. After 4
additional minutes on hold the call will be disconnected.
How the line buttons indicate the line status
The line buttons indicate the status of each line as follows.
Light off The line is free.
Light on The line is being used.
Flashing
A call is on hold on the handset or base unit, or the
Answering System is answering a call (p. 71).
Flashing rapidly A call is being received.
LINE1
LINE2
TG6500.book Page 38 Friday, June 25, 2004 6:56 PM