Filter
Top Products
Useful InformationAnswering SystemTelephone System
23
Programmable Settings
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Auto Talk
The Auto Talk feature allows you to answer calls by simply lifting the handset off the
base unit or charger (for KX-TG6502 or accessory handset users, p. 3). You do not
need to press [C] or [s]. The factory preset is OFF.
• In order to view Caller ID information after you lift the handset to answer a call,
leave the Auto Talk feature turned off.
• If you change the line selection feature from “Auto” to “Line 1” or “Line 2” (p. 69),
the Auto Talk feature will function for that line only. If the other line receives a call,
the Auto Talk feature will not function.
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Auto talk” by pressing [d] or
[B], then press the soft key ( ).
4 Select “On” or “Off” by pressing [d] or [B].
5 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “LCD contrast” by pressing [d] or
[B], then press the soft key ( ).
4 Select the desired contrast by pressing [d]
or [B].
• The contrast will change.
• The number of steps indicates the contrast level.
5 Press the soft key ( ), then press [OFF].
Handset
SELECT
Initial setting
SELECT
Auto talk
Auto talk
:Off
SAVE
Handset
SELECT
Initial setting
SELECT
LCD contrast
LCD contrast
Low High
Ex. Level 3
SAVE
TG6500.book Page 23 Friday, June 25, 2004 6:56 PM