Filter
Top Products
Programmable Settings
22
Line Mode
The line mode for both lines is preset to “B” and generally should not be adjusted. If
the line buttons on the base unit do not light properly, or the line status icons (
and
) are not displayed on the handset properly, the line mode selection is
incorrect. Set line mode to
“A”
. Each line has its own setting.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key ( ).
5 Press [d] (Line1) or [B] (Line2) to select
the line.
6 Select “A” or “B” by pressing [d] or [B].
7 Press the soft key ( )
• To select the other line, repeat from step 4.
8 Press [OFF].
Handset
L1
L2
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
d
=Line1
B
=Line2
Set line mode
Line1:B
SAVE
TG6500.book Page 22 Friday, June 25, 2004 6:56 PM