Filter
Top Products
Useful InformationAnswering System
Preparation
69
Special Features
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
Line Selection
When you make or answer a call, the handset and base unit can automatically
select the line when you press [C] or [s] on the handset or [SP-PHONE] on the
base unit. There are 3 types of line selection. You can change the line selection for
the handset and base unit separately. The factory preset is “Auto”.
Auto (factory preset):
When making a call, LINE 1 will be selected. If that line is unavailable, LINE 2 will
be selected. When answering a call, the ringing line will be selected.
• When you call back from the Caller List (p. 43), the indicated line will be selected.
• If the Auto Talk feature is turned on (p. 23), the unit will select the ringing line when
you lift the handset off the base unit or charger (for KX-TG6502 or accessory
handset users, p. 3), to answer the call.
Line 1: Line 1 will be selected.
Line 2: Line 2 will be selected.
You can select any line by pressing a line soft key ( ) or ( ) on the
handset or a line button on the base unit, regardless of this setting.
Handset line selection
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Press the soft key ( ) at “Line
selection”.
5 Select “Line1”, “Line2” or “Auto” by
pressing [d] or [B].
6 Press the soft key ( ), then press [OFF].
LINE1 LINE2
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Line selection
Line selection
:Auto
SAVE
TG6500.book Page 69 Friday, June 25, 2004 6:56 PM