Filter
Top Products
Useful InformationAnswering System
Preparation
39
Telephone System
For assistance, please call: 1-800-211-PANA(7262)
Answering Calls
When a call is received, the unit rings, “Incoming call” and the called line are
displayed, and the Ringer/Message Alert indicator on the handset and the line
button on the base unit flash rapidly.
2 calls can be handled simultaneously on separate telephone lines by the handset
and the base unit, or by 2 handsets (when the system has 2 or more handsets,
p. 3).
Auto Talk
If the Auto Talk feature is turned on (p. 23), you can answer a call by simply lifting
the handset off the base unit or charger.
Temporary ringer off
While the handset is ringing, you can turn the ringer off temporarily by pressing
[OFF]. The handset will ring again the next time a call is received on that line.
1 Press [C] or [s].
• The called line is automatically selected.
(To change the line selection, see page 69.)
• You can also answer a call by pressing the
called line soft key ( ) or ( ).
• You can also answer a call by pressing any
button except [d], [B] or [OFF].
2 To hang up, press [OFF] or place the
handset on the base unit or charger (for
KX-TG6502 or accessory handset users,
p. 3).
1 Press [SP-PHONE].
• The called line is automatically selected.
(To change the line selection, see page 70.)
• You can also answer a call by pressing the
called line button.
2 Talk into the MIC.
3 To hang up, press [SP-PHONE].
• To transfer the call to another extension, see page 58.
• To transfer the call to the Answering System to allow the caller to leave a
message, see page 79.
• If the ringer volume is turned off for the called line, the unit will not ring for the
line (p. 24, 25).
Handset
Soft Key
()
LINE1
[OFF]
[C]
[s]
Ringer/
Message
Alert
Indicator
Soft Key
()
LINE2
LINE1 LINE2
Base Unit
MIC[SP-PHONE]
LINE Buttons
TG6500.book Page 39 Friday, June 25, 2004 6:56 PM