Filter
Top Products
3. Placing Outside Calls
54 DBS 576 (USA), issued October 2000 576-36-750
Note: You must know the PSD or SSD bin number for the number to be dialed to
perform this task. For information on determining speed dial numbers, see “Checking
Speed Dial Numbers” on page 54.
1. Pick up the handset or press the ON/OFF key.
2. If necessary, access an outside line.
3. Press the AUTO key.
4. Enter the appropriate three digit speed dial bin number (PSD bins 80-99 or SSD
bins 00-79 or 000-799).
Checking Speed Dial Numbers
After speed dial numbers have been assigned, you can check to see what number has
been programmed by using soft keys or by entering the speed dial bin number.
Note: The following tasks require a display phone. To check speed dial numbers on
a non-display phone, see Appendix B, “Customized PSD Bin Numbers” on page 101
for your personalized list of speed dial numbers.
1. Press the MODE key one time. (SSD and PSD appear on the second line of the
display.)
2. Press the soft key next to SSD or PSD. (The first two speed dial entries appear
on the second line of the display.)
3. Scroll through the speed dial directory until the desired speed dial bin entry is
displayed. (To display the next two entries, press the # key. To display the
previous two entries, press the * key.)
4. Pick up the handset or press the ON/OFF key.
5. Press the CONF key.
6. Press the soft key next to the speed dial entry. (The speed dial number appears on
the display.)
To dial a speed dial number by entering the speed dial bin number
To check a speed dial number using the soft keys on a small-
display phone