Filter
Top Products
2. Setting Up Your Phone
576-36-750 DBS 576 (USA), issued October 2000 41
To set extension names using either a large-display or
small-display phone:
5. To set additional Message Key ID codes, press the VOLUME up or down
arrow or
HOLD to move to the desired extension.
6. Repeat steps 4-5 until all Message Key ID codes are set.
7. Press
AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing
ON/OFF PROG * * CONF
2. Enter: 03 and press HOLD HOLD HOLD.
3. Dial the
Extension Number and press HOLD.
4. Enter:
Extension Name:
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired speed dial
name.
Note: Press the FLASH key to clear the entire entry.
7. Press HOLD to store the entry.
8. To set additional extension names, press the
VOLUME up or down arrow or
HOLD to move to the desired SSD.
9. Repeat steps 4-8 until all extension names are entered.
10. Press
AUTO PROG to return to “81 - User Maintenance” (step 1 above)
OR...
Press
AUTO ON/OFF to exit User Maintenance.
Name Assignments