Filter
Top Products
2. Setting Up Your Phone
44 DBS 576 (USA), issued October 2000 576-36-750
To create SSD indexes using either a large-display or
small-display phone:
To change the system date, time, and day:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * *
CONF
.
2. Enter: 02, press HOLD, enter: 2, and press HOLD HOLD.
3. Enter:
SSD Index Number (1-2) and press HOLD.
4. Enter:
SSD Index Name:
• If using a large-display phone, press the soft key next to the desired row of
letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired SSD
name.
Note: Press the FLASH key to clear the entire entry.
7. Press HOLD to store the entry.
8. To set additional SSD index names, press the
VOLUME up or
down key or
HOLD to move to the desired SSD.
9. Repeat steps 6-9 until all SSD indexes are entered.
10. Press
AUTO PROG to return to “81-User Maintenance” (step 1
above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF.
2. Enter: 000 and press
HOLD.
System Clock: Date/Time/Day