Filter
Top Products
2. Setting Up Your Phone
42 DBS 576 (USA), issued October 2000 576-36-750
To create Send Text Messages using either a large-display
or small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter:
11, press HOLD, enter: 0, and press HOLD.
3. Press HOLD, enter: Message Number (0-9), and press HOLD.
4. Enter:
Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next to the desired row of letters.
• If using a small-display phone press the appropriate one-touch key.
Note: Press the FLASH key to clear any existing data.
5. Use the bottom row of FF keys to select a single letter.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
6. Repeat steps 4-5 as many times as necessary to enter the desired Text Message
and press
HOLD to store the entry.
Note: Press the FLASH key to clear any existing data.
7. To set additional text messages, press the VOLUME up or down key or press
HOLD to move to the desired Send Text Message.
8. Repeat steps 4-7 until all Send Text Messages are entered.
9. Press
AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
Send Text Messages