Filter
Top Products
3. Placing Outside Calls
576-36-750 DBS 576 (USA), issued October 2000 52
2. Access an outside line.
3. Press the REDIAL key. (The phone displays and dials the last outside number
dialed.)
Note: The system will continue to redial the busy number until you hang up the
phone, the called party answers the call, or a maximum of 15 redial attempts is made.
1. Pickup the handset or press the ON/OFF key.
2. Access an outside line.
3. Dial the phone number.
4. After hearing the busy tone, press the REDIAL key. (The phone continues to dial
the busy number until the caller answers or the redial timer times out.)
1. Replace the handset or press the ON/OFF key.
USING SPEED DIALING
After PSD numbers and SSD numbers have been assigned, you can quickly dial the
number by pressing the appropriate one-touch or soft key or by entering the
appropriate speed dial bin number. You can also check and see what PSD and SSD
number or name is assigned to specific one-touch or soft keys.
Notes:
• For information on deleting PSD numbers, see “Assigning and Deleting PSD
Numbers” on page 25.
• You cannot delete SSD numbers assigned to one-touch or soft keys. These
numbers are programmed from the attendant’s phone.
Dialing Speed Dial Numbers
You can dial speed dial numbers by using preassigned one-touch keys on non-
display or small-display phones, using soft keys and speed dial directories, or by
entering speed dial bin numbers.
1. Pickup the handset or press the ON/OFF key.
2. If necessary, access an outside line.
To automatically redial a busy number
To cancel automatic repeat dialing
To dial a speed dial number by pressing a one-touch key