Filter
Top Products
2. Setting Up Your Phone
24 DBS 576 (USA), issued October 2000 576-36-750
4. Dial the phone number to be stored.
5. Press the HOLD key.
6. Replace the handset or press the ON/OFF key.
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. Press the AUTO key.
5. Enter the SSD bin number to be programmed.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
Note: **When the system is set up for MCO Code level, one-touch keys
automatically dial an outside line. (MCO Code level requires system programming.)
1. Pickup the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the one-touch key to be programmed.
4. **If the feature functions at the MCO Code level, press AUTO * #.
5. Enter the desired feature code or extension number.
6. Press the HOLD key.
7. Replace the handset or press the ON/OFF key.
Note: This task requires a display phone.
1. Pickup the handset or press the ON/OFF key.
2. Press the CONF key.
To assign an SSD number to a one-touch key
To assign a feature code or extension number to a one-touch key
To check a programmed one-touch key