Filter
Top Products
2. Setting Up Your Phone
46 DBS 576 (USA), issued October 2000 576-36-750
To set the Call Forward ID code using either a large-
display or small-display phone:
To set Walking TRS codes using either a large-display or
small-display phone:
7. To set additional text messages, press the VOLUME up or down key or press
HOLD to move to the desired Reply Text Message.
8. Repeat steps 4-7 until all Reply Text Messages are entered.
9. Press
AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF.
2. Enter:
05 HOLD HOLD.
3. Dial the
Extension Number and press HOLD.
4. Enter:
Call Forward ID Code and press HOLD to store the entry.
Notes:
• The ID code may contain up to 16 digits and contain 0, 1-9, *, #, pause (REDIAL key).
• To clear an entry or any existing data, press the FLASH key.
5. To set additional additional Call Forward ID Codes, press the VOLUME up
or down arrow or
HOLD to move to the desired SSD.
6. Repeat steps 4-5 until all SSD indexes are entered.
7. Press
AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF.
2. Enter:
08 and press HOLD HOLD.
Voice Mail: Set Call-Forward ID Codes
Walking TRS Class of Service