Filter
Top Products
2. Setting Up Your Phone
576-36-750 DBS 576 (USA), issued October 2000 39
To set the Exception Day Modes using either a large-
display or small-display phone:
To set the Mode Schedule using either a large-display or
small-display phone:
1. Enter “User Maintenance” by pressing: ON/OFF PROG * * CONF
2. Enter:
07, press HOLD, enter: 2, and press HOLD HOLD.
3. Enter:
Start Date by Month - two characters and Day - two
characters
for Exception Period 1 and press HOLD to store the entry.
Note: To clear an entry or existing data, press the FLASH key.
4. To set additional Exception Day modes, press the VOLUME up or down
arrow or
HOLD to move to the desired mode.
5. Repeat steps 4-5 until the remaining days in the month are set.
6. Press
AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.
1. Enter “User Maintenance” by pressing:
ON/OFF PROG * * CONF
2. Enter:
07, and press HOLD HOLD HOLD.
3. Enter: Start Time in Hours (two characters) and Minutes
(two characters)
for Pattern 1 - first mode and press HOLD.
Notes: To clear an entry or existing data, press the FLASH key.
4. Enter: Desired Mode for Pattern 1 - first (0 - None, 1 - Day 1,
2 - Day 2, 3 - Night, 4 - Night 1, 5 - Night 2
) and press HOLD to
store the entry.
Note: To clear an entry or existing data, press the FLASH key.
5. To set additional mode schedules, press the VOLUME up or down arrow or
HOLD to move to the desired mode.
6. Repeat steps 3-5 until all patterns and modes are set. (There are 3 total patterns
with 5 start time/modes each.)
Note: Entry Positions are listed in Chapter 4 of Section 700 - Feature Operations.
7. Press AUTO PROG to return to “81-User Maintenance” (step 1 above).
OR...
Press
AUTO ON/OFF to exit User Maintenance.