Filter
Top Products
INTRODUCTION
Purpose
NEAX2000 IVS
2
Remote PIM System Manual
ND-70917 (E), Issue 1.0
Page 1
INTRODUCTION
PURPOSE
This manual explains the system outline and installation procedure for providing the Remote PIM
to the NEAX2000 IVS
2
.
USING THIS MANUAL
This manual contains the following chapters:
CHAPTER 1 GENERAL INFORMATION
This chapter explains the outline of system configuration, required equipment, system capacity,
system conditions, and time slot allocation.
CHAPTER 2 INSTALLATION
This chapter explains how to install the Remote PIM hardware. This chapter describes only the
installation procedure required for providing the Remote PIM System. Refer to the Installation
Procedure Manual for general installation procedures.
CHAPTER 3 TROUBLESHOOTING
This chapter explains the method for fault diagnosis and troubleshooting when maintenance per-
sonnel detect fault occurrences by lamp indication on DAIA/DAIB/DAIC/DAID/DAIE/DAIF and
M10 cards. For other system faults, refer to the Maintenance Manual.
CHAPTER 4 CIRCUIT CARD INFORMATION
This chapter explains the mounting location, the meaning of lamp indications, and the method of
switch settings of each circuit card for the Remote PIM.