Filter
Top Products
NEAX2000 IVS
2
Remote PIM System Manual
Page 80 ND-70917 (E), Issue 1.0
CHAPTER 4 CIRCUIT CARD INFORMATION
PN-DAIC (DAI)
PN-DAIC (DAI)
Location of Lamps, Switches, and Connectors
Lamp Indications
LAMP
NAME
COLOR FUNCTION
RUN Green Flashes at 120 IPM while this card is operating normally
LINK Green Remains lit when the following connections are normal:
• Control channel link between the DAIA card and DAIB card
• Connection between the opposite DAIC card
Goes out after 15 seconds of link disconnection
RED Red Remains lit when detecting PCM signal loss or Frame Alignment
signal loss
RMT Red Remains lit when receiving the alarm signal from a distant office
LOOP – Not used
PWR – Not used
BL – Not used
SW2
SW3
TBUS
RBUS
CN
RUN
MB
LINK
RED
RMT
LOOP
PWR
BL
SW1