Filter
Top Products
NEAX2000 IVS
2
Remote PIM System Manual
Page 8 ND-70917 (E), Issue 1.0
CHAPTER 1 GENERAL INFORMATION
Required Equipment
REQUIRED EQUIPMENT
Table 1-2 shows the required equipment for providing the Remote PIM System.
Table 1-2 Required Equipmen t
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PN-DAIA DAI T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor and BUS interface
One through three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
PN-DAIB DAI T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Card for
Remote PIM
Accommodates 24-channel PCM digital lines, and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
PN-DAIC DAI T1 Digital Trunk Interface (23B + D, 1.5 Mbps) Channel
Expansion Card
Accommodates 24-channel PCM digital lines
One through six cards can be provided at the Main Site.
Two cards can be provided at the Remote Site.
PN-DAID DAI E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor and BUS interface
One though three cards must be provided at the Main Site,
which corresponds to the number of the Remote Site.
PN-DAIE DAI E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines and provides
Firmware Processor
One card is required per Remote PIM at the Remote Site.
PN-DAIF DAI E1 Digital Trunk Interface (2 Mbps) Channel Expansion Card
Accommodates 30-channel PCM digital lines
One through three cards can be provided at the Main Site.
One card can be provided at the Remote Site.