Filter
Top Products
NEAX2000 IVS
2
Remote PIM System Manual
Page 22 ND-70917 (E), Issue 1.0
CHAPTER 2 INSTALLATION
Installation Procedure
Installation Procedure for Remote Site
Figure 2-3 shows a flowchart of the installation procedure for the Remote Site.
Figure 2-3 Installation Procedure for Remote Site
END
START
Providing PFT
MP Reset
See Page 31.
See Page 29.
See Page 29.
See Page 39.
See Page 50.
See Page 55.
Mounting M10 Card
See Page 29.
Mounting Line/Trunk Card for T1
NOTE 1: This procedure is required when providing PN-M10 card to connect an optical
interface.
NOTE 2: It is recommended that the Power Failure Transfer (PFT) is provided on the
Remote Site in case the link between the Main Site and the Remote Site is lost.
Mounting DAIB Card for T1 /
DAIE Card for E1
Mounting DAIC Card for T1 /
DAIF Card for E1
See Page 35.
Mounting Line/Trunk Card
for E1
Optical Cable Connection
See Page 51.
DAI Connection at Remote Site
NOTE 1
NOTE 2