Filter
Top Products
CHAPTER 2 INSTALLATION
Installation for Main Site
NEAX2000 IVS
2
Remote PIM System Manual
ND-70917 (E), Issue 1.0
Page 27
(3) Cable Connection Between DAIA/DAID Card and DAIC/DAIF Card
Connect between the RBUS connector on the DAIC/DAIF card and the BUS connector on
the DAIA/DAID card by 48-TW-0.2 CONN CA, as shown in Figure 2-6.
Up to two DAIC cards can be mounted per DAIA card.
Only one DAIF card can be mounted per DAID card.
Figure 2-6 DAIA/DAID Between DAIC/DAIF Cable Connection (1 of 2)
: 17-TW-0.3 CONN CA-A
DAIC
• When mounting 1 DAIA/DAID card and 1 DAIC/DAIF card
• When mounting 2 DAIA/DAID cards and 2 DAIC/DAIF cards
TBUS
RBUS
: 48-TW-0.2 CONN CA
PCM1
PCM0
TBUS
RBUS
PCM1
PCM0
DAIA
/DAIF /DAID
DAIC DAIA
/DAIF /DAID
DAIC DAIA
/DAIF /DAID
BUS
BUS
NOTE: You can mount two DAIA/DAID cards and two DAIC/DAIF cards in PIM0 or
PIM2, or one DAIA/DAID card and one DAIC/DAIF card in PIM0 and one DAIA/
DAID card and one DAIC/DAIF card in PIM2.
NOTE