Filter
Top Products
CHAPTER 2 INSTALLATION
Installation for Remote Site
NEAX2000 IVS
2
Remote PIM System Manual
ND-70917 (E), Issue 1.0
Page 29
INSTALLATION FOR REMOTE SITE
Mounting DAIB Card for T1 / DAIE Card for E1
(1) Before mounting the DAIB/DAIE card, set the MB switch to UP position,
and set the other switches to appropriate position. See CHAPTER 4.
(2) Mount the DAIB/DAIE card in the MP slot on Remote PIM.
After mounting the card, set the MB switch to DOWN position.
Mounting DAIC Card for T1 / DAIF Card for E1
(1) Before mounting the DAIC/DAIF card, set the MB switch to UP position, and set the other
switches to appropriate position. See CHAPTER 4.
(2) Mount the DAIC/DAIF card in the AP slots (AP00-AP11) on Remote PIM.
A maximum of two DAIC cards can be mounted per Remote PIM.
A maximum of one DAIF card can be mounted per Remote PIM.
After mounting the card, set MB switch to DOWN position.
(3) After mounting all DAIC/DAIF cards, set MB switch on DAIB/DAIE card to UP, and then
DOWN.
Mounting M10 Card
(1) Confirm the correct switch settings. See CHAPTER 4.
(2) Mount the M10 card in any one of LT slot on each PIM.
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required