Filter
Top Products
74
SUPERCONSOLE 1000
®
User Guide
If the hotel/motel is using a Property Management System
1. Press Function.
2. Press [G
UEST ROOM].
3. Dial the room number.
4. Press [R
ESTRICT O/G].
The phone is restricted from making outgoing trunk calls. To remove the
restriction and allow outgoing calls, repeat the procedure.
Blocking Room-to-Room Calls
You can use the Block key on the console to bar calls between guest
rooms. Only room phones programmed with call blocking will be affected
by this; ask your communications department for further information.
To block room-to-room calls:
• Press Block.
The lamp above the Block key lights and stays lit until blocking is
canceled.
Displaying/Clearing a Message Register
The message register is a record of all external calls placed from a guest
room telephone. You can display and clear a room’s message register
while the console is idle or while connected to the guest room.
To display or clear a room’s message register:
1. Press Function.
2. Press [G
UEST ROOM].
3. Dial the room number (not necessary if you are already connected to
the room).
4. Press [C
LR REG].
If a printer is attached to the console, a report may print showing the
contents of the register before it was cleared.