Filter
Top Products
18
SUPERCONSOLE 1000
®
User Guide
To program a macro or to clear a previously programmed macro:
1. While holding down the Function key, press the softkey that
corresponds to the firmkey you want to program.
The display shows the macro keystrokes (if any) currently programmed to
the selected key.
2. Enter the keystrokes you want to include in your macro.
You can enter up to 15 keystrokes using the dial pad keys and the special
function softkeys explained below.
Use the ← key to correct any mistakes.
3. To clear a previously programmed macro, press the [CLEAR] softkey.
4. Clearing macros from keys formerly programmed as Trunk Group or
Set Page keys restores their original function.
5. Press the [SAVE/EXIT] softkey to complete the programming.
6. Select another firmkey to program or press the [EXIT] softkey to leave
programming mode.
To execute a macro:
• Press the key programmed with the macro you want to execute.
Tip: Write down the keystrokes in case you experience problems with the
console and have to reprogram your macros.