Filter
Top Products
16
SUPERCONSOLE 1000
®
User Guide
Switching to Night/Day Service
Incoming calls that normally ring the console during the day can ring
another answering point at night. Your system may have one or two night
service modes called Night 1 and Night 2. The mode you should select
depends on system programming.
Any attendant can switch the system into night or day service. When the
system is in night service, the night status indicator (Night 1 or Night 2)
displays on all consoles.
To switch to night or day service:
1. Press Function.
2. Press [N
IGHT 1], [NIGHT 2], or [DAY] as required.
Setting the Console Language
The console can display call-handling information and softkey prompts in
English, French or . (Other languages may be available depending on
system programming.)
To change languages:
1. Press Function.
2. Press [L
ANGUAGE].
3. Press the softkey that corresponds to the language you want.