Filter
Top Products
28
SUPERCONSOLE 1000
®
User Guide
Reaching an Extension with an Advisory Message
Users with a Mitel Networks display phone can show a short message,
called an Advisory Message, on other display phones or consoles that call
their phone. When you call an extension with an Advisory Message, the
message appears on the DST line of the console display as follows:
>>>DST 3070 S.BERRY IN A MEETING RINGING<<<
In this example, the user has left the message “In a meeting” on his or her
phone. For a list of other Advisory Messages, see page 83. See also
Setting/Clearing Advisory Messages on page 58.
Placing Calls
To place a call:
1. Dial the destination number using the dialpad keys.
The dialed number appears on the second line of the display.
2. After completing the call, press Release to disconnect it from the
console.
Placing a Call on Hold
You can place up to three calls on hold using the fixed Hold keys. If you
need to place more calls on hold, use the Hold 4+ key in combination with
the softkeys.
To place a call on hold:
1. Inform the caller that you are placing the call on hold.
2. Press Hold 1, Hold 2 or Hold 3.
Its lamp lights indicating the call is on hold.
To retrieve a call on hold:
• Press Hold that was used to place the call on hold.