Filter
Top Products
20
SUPERCONSOLE 1000
®
User Guide
Programming a Macro for Transfer-to-Voice-mail
To program a macro that transfers calls to a voice mailbox:
At step 4 in the programming procedure:
• Dial the voice mail hunt group number.
• Press the [INSERT PAUSE] softkey to allow the voice mail system
time to respond.
• Press the [TONES ON] softkey.
• Press
∗ or other key (if any) as required by the voice mail system.
• Press the [DEST] softkey to dial the digits displayed on the DST line
when you press the macro key.
• Press the [RELEASE] softkey to complete the transfer and release the
console from the call.
• Select another firmkey to program or press the [EXIT] softkey to leave
programming mode.
Now, when a call you transferred to an unanswered extension recalls, you
can press the macro key to transfer the caller to the extension’s voice
mailbox.
Programming a Macro for Last Call Recovery
You can program a macro key to recover a call you transferred to the
wrong extension. To successfully recover the call, you must press the
macro key while the extension is still ringing. Also, you cannot have started
another action, such as dialing or answering a call, following the transfer.
To program a macro that recovers calls that you transferred to the
wrong extension:
At step 4 in the programming procedure:
• Enter the Directed Call Pickup access code.
• Press the [LAST NUM] softkey.
• Press the [SAVE/EXIT] softkey to complete the programming.
• Select another firmkey to program or press the [EXIT] softkey to leave
programming mode.