Filter
Top Products
50
SUPERCONSOLE 1000
®
User Guide
Setting up Night Answer Points
A night answer point is the number of an extension or other destination
where incoming trunk calls will ring when the system is in Night Service.
For more information about Night Service, see page 16.
To set up night answer points:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [M
ORE…].
4. Press [F
LEX NIGHT].
5. Enter the trunk number.
6. Press either [N
IGHT 1] or [NIGHT 2] to choose the night service mode.
7. Dial the destination number of the night answer point.
The destination can be an extension, an attendant console directory
number, an LDN number on a console, a hunt group or a Night Bell
directory number.
8. Press [S
ET] to confirm the new number or [EXIT] to exit without
making changes.
Displaying the System Identification
A System Identification number may be assigned to your PABX. This
number appears on Station Message Detail Reporting (SMDR) and
traffic-measurement reports to identify your system when central polling
equipment is used. It is usually unnecessary to change this number once
it is entered.
To display or change the System Identification:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [S
YSTEM IDENT].
4. Enter a new three-digit number if required.
5. Press [S
ET] to confirm the new number.