Filter
Top Products
64
SUPERCONSOLE 1000
®
User Guide
Accessing Specific Trunks
You can access a specific trunk and use it to make an outgoing call.
To access a specific trunk:
1. Press Function.
2. Press [A
TT FUNCTION].
3. Press [T
RUNKS].
4. Enter the trunk number.
5. Press [E
NTER].
6. Press [A
TT ACCESS].
7. Do one of the following:
• If the trunk is free (as indicated by dial tone), dial the outside
number.
• If the trunk is busy, either press [F
ORCED RLS] to clear the trunk of
the call, or press and hold down [O
VERRIDE] to barge into the call.
Both parties will hear a long beep before you enter the conversation.
Trunks that are designated as dictation trunks (M/MM leads), and in use,
cannot be accessed.